Biate Automation Equipment Co., Ltd. provides you with gear surfacing equipment - carbide bit surfacing equipment, tungsten carbide alloy particles and diamond particles surfacing process is also gradually used in recent years. The improvement of the automatic process at the mechanical level has also driven the tungsten carbide particle surfacing process to achieve (30-60 mesh) particle tungsten carbide surfacing and diamond particle surfacing, most manufacturers will use mechanically broken tungsten carbide particles, which can reduce costs and distribute the surfacing layer alloy evenly. The surface remelting amount of tungsten carbide alloy particles in the surfacing layer is small, and the diffusion rate of alloying elements is low, which can effectively avoid the overall embrittleness of the composite surfacing layer.
Tungsten carbide alloy particles and diamond particles surfacing process simple operation instructions:
The bonding wire surfacing tungsten carbide (WC) particles and diamond particles directly onto the workpiece surface through an automated alloy material feeder.
Tungsten carbide particles do not settle at the bottom of the surfacing layer, but are directly deposited on the surface of the workpiece.
After mechanized operation, tungsten carbide alloy particles and diamond particles can be evenly dispersed in the wear-resistant surfacing layer from top to bottom, and the wear-resistant effect is enhanced after temperature cooling.
On the whole, the wear resistance and impact resistance of the workpiece after
